{"product_id":"universali-hidroizoliacija-unibase-ms-fiber-sf","title":"UniBase MS Fiber – Fiberglass-Reinforced Waterproofing, Grey, 1kg\/5.67kg","description":"\u003ch3\u003eRoof, balcony or gutter joint leaking again?\u003c\/h3\u003e\n\u003cp\u003ePandaCoat UniBase MS Fiber is a fiberglass-reinforced, single-component liquid waterproofing membrane. Thicker and tougher than standard UniBase MS, making it ideal for the trickiest spots: joints, chimney bases, gutters and other details where you need a reliable, thick coat with no risk of leaks.\u003c\/p\u003e\n\u003ch3\u003eUniBase MS Fiber benefits\u003c\/h3\u003e\n\u003cp\u003eFiberglass-reinforced - Fiberglass strands increase the coating's strength and crack resistance – reliable sealing even at heavily stressed or awkwardly shaped points (joints, corners, chimney bases).\u003c\/p\u003e\n\u003cp\u003eOne-coat solution - The thicker consistency often means a single heavy coat is enough – apply with a brush or roller straight onto the surface, no primer needed.\u003c\/p\u003e\n\u003cp\u003eWeatherproof in any conditions - Once cured, the membrane resists UV rays, rain, standing water and temperature swings from -40°C to +80°C.\u003c\/p\u003e\n\u003cp\u003eSolvent- and isocyanate-free - Odourless, safe to use both outdoors and in enclosed spaces.\u003c\/p\u003e\n\u003cp\u003eCoverage 1.5–1.8 kg\/m² - Made in the EU to strict quality standards.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cp\u003eA single-component, liquid-applied waterproofing coating based on MS polymer (silane-modified polymer), reinforced with fiberglass strands. Cures with atmospheric humidity into a flexible, strong, fully waterproof membrane. A thicker, stronger version of standard UniBase MS – built for detail work and areas needing extra reinforcement. Colour – grey.\u003c\/p\u003e\n\u003ch3\u003eWhere to use\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat and pitched roofs, their joints and details\u003c\/li\u003e\n\u003cli\u003eSurfaces exposed to standing water\u003c\/li\u003e\n\u003cli\u003eGutters, chimney bases, solar collector mounting points\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam insulation\u003c\/li\u003e\n\u003cli\u003eBalconies, terraces, flowerbeds, shed and other outdoor structure roofs\u003c\/li\u003e\n\u003cli\u003eConcrete, wood, plastic, metal and tile surfaces\u003c\/li\u003e\n\u003cli\u003eSealing cracks and damage on existing roof coverings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDensity: 1.40 g\/cm³\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eWater vapour permeability: 12.7 g\/m²\/day\u003c\/li\u003e\n\u003cli\u003eWatertight: 1m water column \/ 24h (DIN EN 1928)\u003c\/li\u003e\n\u003cli\u003eAdhesion on concrete (with primer): \u0026gt;2 N\/mm²\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -40°C to +80°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSource: PandaCoat UniBase MS Fiber technical data sheet (TDS).\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eAvoid applying in rainy weather. The surface must be free of dust, grease and loose particles; old, flaking coatings must be removed. Joints and cracks should be pre-sealed with UNIBASE MS PASTE sealant.\u003c\/p\u003e\n\u003cp\u003eApply UNIBASE MS FIBER with a brush, roller or spray equipment in 2–3 coats. For demanding areas – joints, corners, chimney bases, solar collector mounting points – it's recommended to embed a non-woven polyester geotextile (60–120 g\/m²) between coats to reinforce mechanical and crack-bridging properties. Allow 2 to 48 hours between coats, depending on conditions. Once cured, the material can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e recommended minimum 1.5–1.8 kg\/m² (1.1–1.3 L\/m²).\u003cbr\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 12–24 hours, depending on ambient conditions.\u003cbr\u003e\u003cstrong\u003eNot suitable\u003c\/strong\u003e as a directly exposed layer in swimming pools.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"1 kg","offer_id":49444235968846,"sku":"HDR-AMZ-MS-FIBER-1KG-SB-GR","price":13.92,"currency_code":"EUR","in_stock":true},{"title":"5.67 kg","offer_id":60827283554638,"sku":"HDR-AMZ-MS-FIBER-1GAL-SF-GR","price":65.34,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/5714\/1326\/files\/01-pandacoat-unibase-ms-fiber-grey-5-67kg-main-image.jpg?v=1789486267","url":"https:\/\/pandacoat.lt\/en\/products\/universal-waterproofing-unibase-ms-fiber-sf","provider":"Pandacoat","version":"1.0","type":"link"}